Home Running Cost Calculator
The hub calculator: bring the pieces together into one annual figure. Enter each cost as a monthly or annual amount — use the detailed calculators linked beside each section to work any of them out properly — and add your own sections for anything we've missed.
The results below are from your previous entries — fix the errors to update them.
Total running cost per year
—
| Per month | — |
|---|---|
| Per day | — |
Where it goes
| Section | Per year | Share |
|---|
No costs entered yet — add an amount to at least one section above (or add a custom section) and your totals will update. Every section is optional: leave out anything that does not apply to your home.
Nothing you type is stored or sent anywhere — the total exists only on this page.
How the calculation works
Each section's share of the total is shown so the biggest lever is obvious. The amounts shown at first are illustrative examples — the value of this page is your own figures in it.
Worked example
Electricity 120 a month (1,440 a year), heating 1,800 a year, water 45 a month (540), and 600 of other costs total 4,380 per year — 365 a month, 12 a day — with heating the largest share at 41.1%.
Assumptions and limitations
- Mortgage or rent can be added as a custom section if you want a full cost-of-housing figure; by default this page covers running costs only.
- Irregular costs (repairs, appliance replacement) are best entered as an annual average.
Work out each section properly
Walking through the calculation, step by step
The calculator on this page does one thing, and it does it in the open: it turns the numbers you type into the answer shown in the result table, using the formula above it. There is no hidden adjustment and no extra factor added after the formula. If you can follow the formula line by line, you can check the calculator by hand, and that is exactly what this section does. Start with the largest cost you know, and enter it first: a total built from the parts you are sure about is more useful than a total built from guesses, and the largest part is the one worth measuring properly.
Here is the formula again, broken into its steps, in the order the calculator applies them:
- annual total = Σ sections (monthly amounts × 12) This line gathers the parts above it into the single figure the calculator shows first.
Watch the units as you go, because most mistakes in this kind of calculation are unit mistakes, not arithmetic mistakes. Power and energy are the pair that causes the most confusion: power, in watts or kilowatts, is a rate at which energy is used, and energy, in kilowatt-hours, is power multiplied by time. A 2,000 W heater running for one hour uses 2 kWh, and a 2 kW heater running for half an hour uses 1 kWh. Watts become kilowatts when you divide by 1,000, and kilowatt-hours are what your bill counts, so keeping those two apart is what makes the answer come out in the right size.
The worked example above is the best way to test whether you have understood the steps. It begins like this: Electricity 120 a month (1,440 a year), heating 1,800 a year, water 45 a month (540), and 600 of other costs total 4,380 per year — 365 a month, 12 a day — with heating the largest share at 41.1%. Read it slowly and match each number in it to a field above and to a line of the formula. Notice the order: the quantities are combined first, the rate is applied last, and the answer is then expressed for the period the example states. If you change one number in the example and keep the rest, the answer changes in the direction the formula predicts, and that is a useful habit: change one thing at a time, run the calculator again, and watch which output moves.
How to read your result
The result table on this page answers the question in the title, and the first row in it is the headline: the total for the period you entered. The rows underneath it are not decoration. They show how the total is built, so that you can see which part of it is energy, which part is fixed charges, and what the cost works out to per day or per unit. If the total surprises you, the breakdown is where the surprise is explained: a total that looks high because of a fixed charge is a different problem from a total that looks high because of the amount used.
Read the result table row by row, in this order:
- Per month is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- Per day is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
The worked example on this page puts the result in context. It ends with this conclusion: Electricity 120 a month (1,440 a year), heating 1,800 a year, water 45 a month (540), and 600 of other costs total 4,380 per year — 365 a month, 12 a day — with heating the largest share at 41.1%. Hold your own result next to that conclusion and ask whether the two are in the same range for similar inputs. If yours is far away, the most likely cause is an input that does not match the example, and the field help text above will tell you which one to check first.
What affects the result most
Not every input matters equally, and the ranking is written into the formula. An input that the formula multiplies by moves the answer in proportion: double it, and the answer doubles, as long as everything else stays the same. An input that the formula divides by moves the answer the other way: raise it, and the answer falls. A fixed charge is different again: it does not move at all when you use more, so it matters most when use is low and least when use is high. Before you spend effort improving an input, check where it sits in this ranking, because a precise number for a small input is worth less than a rough number for the biggest one.
- The largest section: whichever section is largest in your total is the one that moves the answer most, because the total is the sum of the sections. In the worked example that is heating, at 41.1 percent of the total.
- Heating: heating is the largest section in the worked example, and it is the section where a change in the annual figure moves the total most.
- Electricity: the electricity section is a monthly figure multiplied by twelve, so a change of 10 a month is a change of 120 a year.
A useful check is the doubling test. Take the worked example on this page, double its main quantity in your head, and ask what the formula would give: for a quantity the formula multiplies by, the answer doubles too. That is why the first thing to get right is the quantity itself — the amount used, the hours run, the area, or the distance — and the second thing is the rate or price. Everything else on the page is either a conversion between units, which the formula handles for you, or a fixed amount, which you can read straight from a bill.
Common mistakes
Most wrong answers from this calculator come from the same few slips. They are easy to make and easy to check for, and checking for them takes less time than re-doing the whole calculation:
- Rounding too early. Rounding each step of a calculation before the next step uses the rounded number, and the rounding adds up. Enter the full numbers the calculator asks for, let it do the arithmetic, and round only the final answer when you quote it.
- Ignoring what the calculator leaves out. The assumptions section above lists what is not included in the answer — fixed charges, taxes, maintenance, installation and other costs, depending on the calculator. Treating the result as a complete bill, or as a complete saving, is the most common way to be disappointed by it afterwards.
- Trusting a nameplate figure for a cycling appliance. A fridge, an oven or an air conditioner does not draw its rated power all the time it is switched on: it cycles. Using the nameplate watts as if they applied continuously overstates the energy, and the assumptions section on this page says so for the appliances it applies to.
Ways to lower the cost
The result on this page is a starting point, not a verdict. These are the practical ways to use it:
- Measure before you spend. Run the calculator with your real numbers first, and find which input drives the result, because the section above ranks them. Money spent on a small input buys a small reduction; the same money spent on the biggest input buys a bigger one.
- Check the rate before you change anything else. The rate scales the whole answer, and it is the one input you can sometimes change without changing how you live: a different tariff, a different time of use, or a corrected reading can move the result without any new equipment.
- Cut the quantity, not the comfort, where you can. Hours of use and duty cycle are quantities you control directly, and a small reduction in the hours something runs, or in how hard it works, reduces the cost in proportion. The calculator lets you test the reduction before you commit to it.
- Fix the fixed part separately. If the result table shows a large fixed or standing charge, reducing use will not reduce that part. That is a different problem from reducing use, and it is solved by looking at the tariff itself rather than at how much you use.
Frequently asked questions
Why does the calculator ask for each section separately?
Because the total is the sum of the sections, and a total entered as one number cannot be checked or improved. Entering each section separately shows which part is largest, and it is the largest part that decides where to look first.
Can I use the preset rate, or should I use my own?
Use your own rate whenever you have it. The presets on this page are published averages or regulated figures, provided as starting points so the calculator works before you have a bill to hand. Your own rate, taken from a recent bill, is always the more accurate input, and the result moves in proportion to it.
Does the result include tax?
The calculator applies the rate you enter exactly as you enter it. If the rate you type already includes tax, the result includes it; if it does not, the result does not, and tax must be added afterwards. Where a calculator on this site has its own tax field, that field is the place to enter it, and the assumptions section above says which case applies to this page.
Why is my bill higher than this calculator's answer?
A bill can be higher than this calculator's answer for reasons the calculator does not include: fixed charges and taxes, other appliances and loads, an estimated reading, or a period that does not match the one you entered. Compare the result table row by row with the bill, and the row where the two diverge is the one to investigate.