Calculator category
Electricity Costs
Electricity is the meter that never sleeps: lights, appliances, electronics, pumps and — in more homes every year — heating and the car. Yet most people meet their electricity cost as a single monthly number, with no idea which part of it they control.
The calculators in this category start from the only two numbers that matter — how many kilowatt-hours you use, and what you pay for each one — and build up from a single appliance to a whole estimated bill, including time-of-use tariffs where the price changes by the hour.
The Electricity Costs category holds 3 calculators: Electricity Cost Calculator, Electricity Bill Estimator, kWh Calculator. Each one answers a part of the same question, and together they answer the whole of it. The point of the category is not to give you separate answers that do not agree with each other, but to give you one answer that you can trust, built from the parts that matter most in your own home.
Start with Electricity Cost Calculator. It is the calculator in this category that takes the broadest view, and its result is the number the other calculators refine. Run it first, with the numbers from a recent bill, and write the result down: it is the baseline against which every other figure in the category should be judged, and it is the figure to come back to when a later calculation surprises you.
Then use the other calculators in the category to break that baseline down. Electricity Bill Estimator takes one part of the total and works it out in detail, so you can see whether that part is large because the quantity is large, because the rate is high, or because the efficiency is low. That is the question this category is really asking, and it is the question that decides what to do next, because the remedy for a large quantity is different from the remedy for a high rate.
Before you run any of these calculators, gather the numbers they all need. The first is electricity used (From your meter reading or bill for the period.), and the second is your rate, taken from a recent bill rather than from a preset average. With those two numbers in hand, every calculator in this category gives you an answer about your home; without them, it gives you an answer about an average home, and the difference between the two is often larger than the saving you are trying to measure.
Calculators in this category
Electricity Cost Calculator
Electricity Costs
Electricity Bill Estimator
Electricity Costs
kWh Calculator
Electricity Costs
What drives the cost
- Your unit rate (per kWh) — the single biggest lever, set by your tariff or, in regulated markets, a price cap.
- Standing or supply charges: a fixed daily amount you pay even at zero usage, which quietly raises your effective rate at low consumption.
- How much you use, and when: time-of-use tariffs can make the same kWh cost several times more at peak hours.
- Taxes and levies, which differ by country and are sometimes already inside published average prices.
- The result in this category is most sensitive to the quantity you enter first, because the formula multiplies by it. A quantity that is wrong by a tenth makes the answer wrong by a tenth, and no amount of precision in the other inputs can repair that.
Ways to save
- Find your real effective rate — total bill ÷ kWh used — before comparing tariffs; a low unit rate with a high standing charge can lose.
- Shift flexible loads (laundry, dishwashing, EV charging) into off-peak windows if your tariff rewards it.
- Hunt standby and always-on loads with the appliance calculator; a few watts running 8,760 hours a year adds up.
- Re-check your usage against a typical bill breakdown with the Bill Estimator before paying for an energy audit.
- Re-run the calculators in this category together whenever one of their shared inputs changes. A new rate, a new appliance or a new pattern of use changes every calculator that uses it, and running them together is how you keep the answers consistent with each other.
Country differences
US: residential prices averaged 18.19¢/kWh nationally in EIA data (2026 year-to-date) but ranged from 12.46¢ in North Dakota to 46.41¢ in Hawaii — state matters more than country.
UK: the Ofgem price cap set electricity at 26.32p/kWh plus a 54.83p daily standing charge for October–December 2026 for default tariffs.
Canada: Hydro-Québec's 2025 comparison put residential prices between 8.29¢/kWh (Montréal) and 22.90¢/kWh (Calgary) at 1,000 kWh a month.
Australia: regulated reference prices (the Default Market Offer) are set per distribution network, which is why Dwellario asks Australian users for their own tariff rate.
Frequently asked questions
What is a kWh, in plain terms?
One kilowatt-hour is one kilowatt of power running for one hour: a 2 kW heater for half an hour, or a 10 W bulb for 100 hours. Your bill counts these units.
Why is my effective rate higher than my tariff rate?
Because the standing charge and any fixed fees are spread over your kWh. Divide the whole bill by the kWh used to get the number that matters.
Are the preset rates on this site my tariff?
No. Presets are published averages or regulated caps from official sources, provided as starting points. Your bill's own rate is always the most accurate input.
Where should I start in the Electricity Costs category?
Start with Electricity Cost Calculator, using the numbers from a recent bill, and write the result down. Then run Electricity Bill Estimator for the part of the total you most want to understand, and compare its result with the first calculator result. If the two disagree, check the inputs they share, the quantity and the rate, before you trust either answer.
Guides
- How to Read Your Electricity Bill
- How to Find Your Real Electricity Rate
- What Uses the Most Electricity in a Home?