kWh Calculator
A watt is power right now; a kilowatt-hour is energy over time — and energy is what you are billed for. Enter a device's wattage and how long it runs, or pick a typical appliance to start from.
The results below are from your previous entries — fix the errors to update them.
Energy per day
—
| Watt-hours per day | — |
|---|---|
| kWh per period (30 days) | — |
| kWh per month (avg) | — |
| kWh per year | — |
Multiply any kWh figure by your rate per kWh to get its cost — or use the Appliance Energy Cost Calculator.
How the calculation works
kWh per day = watt-hours ÷ 1,000
kWh per month = kWh per day × 365 ÷ 12 · kWh per year = kWh per day × 365
A 100 W device running 5 hours a day uses 500 watt-hours — exactly 0.5 kWh — per day, about 15.2 kWh in an average month and 182.5 kWh in a year.
Assumptions and limitations
- The device is assumed to draw its full rated wattage whenever it is on. Devices that cycle (fridges, air conditioners) or vary their load draw less on average — the preset list uses duty-cycle averages for those where noted.
- Standby power is not included unless the hours you enter include standby time.
- "Per month" is the standardised average month (365 ÷ 12 days), not a specific calendar month.
Walking through the calculation, step by step
The calculator on this page does one thing, and it does it in the open: it turns the numbers you type into the answer shown in the result table, using the formula above it. There is no hidden adjustment and no extra factor added after the formula. If you can follow the formula line by line, you can check the calculator by hand, and that is exactly what this section does. Start with the first field, power, and read its help text before you type anything: the help tells you where the number comes from, and a number taken from the right place is the single biggest improvement you can make to the answer.
Here is the formula again, broken into its steps, in the order the calculator applies them:
- watt-hours per day = watts × hours per day This line only changes the time scale of the answer: the same cost, expressed for a day, a month or a year.
- kWh per day = watt-hours ÷ 1,000 This line only changes the time scale of the answer: the same cost, expressed for a day, a month or a year.
- kWh per month = kWh per day × 365 ÷ 12 · kWh per year = kWh per day × 365 This line only changes the time scale of the answer: the same cost, expressed for a day, a month or a year.
Watch the units as you go, because most mistakes in this kind of calculation are unit mistakes, not arithmetic mistakes. The fields on this page use these units: days, hours, watts. Power and energy are the pair that causes the most confusion: power, in watts or kilowatts, is a rate at which energy is used, and energy, in kilowatt-hours, is power multiplied by time. A 2,000 W heater running for one hour uses 2 kWh, and a 2 kW heater running for half an hour uses 1 kWh. Watts become kilowatts when you divide by 1,000, and kilowatt-hours are what your bill counts, so keeping those two apart is what makes the answer come out in the right size.
This page has no worked example with numbers, so make your own check instead. Run the calculator once with the starting values, write down the result, then change a single input by a round amount and run it again. The result should move in the direction the formula predicts: up when a quantity or a rate goes up, down when an efficiency goes up. If it moves the other way, you have found a wrong entry, not a wrong calculator, and the field help text is the first place to look.
How to read your result
The result table on this page answers the question in the title, and the first row in it is the headline: the total for the period you entered. The rows underneath it are not decoration. They show how the total is built, so that you can see which part of it is energy, which part is fixed charges, and what the cost works out to per day or per unit. If the total surprises you, the breakdown is where the surprise is explained: a total that looks high because of a fixed charge is a different problem from a total that looks high because of the amount used.
Read the result table row by row, in this order:
- Watt-hours per day is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- kWh per period ( is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- days) is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- kWh per month (avg) is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- kWh per year is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
What affects the result most
Not every input matters equally, and the ranking is written into the formula. An input that the formula multiplies by moves the answer in proportion: double it, and the answer doubles, as long as everything else stays the same. An input that the formula divides by moves the answer the other way: raise it, and the answer falls. A fixed charge is different again: it does not move at all when you use more, so it matters most when use is low and least when use is high. Before you spend effort improving an input, check where it sits in this ranking, because a precise number for a small input is worth less than a rough number for the biggest one.
- Power: raising this raises the result in proportion, because the formula multiplies by it. It is usually the input where a better measurement pays off first.
- Hours used per day: raising this raises the result in proportion, because the formula multiplies by it. It is usually the input where a better measurement pays off first.
- Days in the period: raising this raises the result in proportion, because the formula multiplies by it. It is usually the input where a better measurement pays off first.
A useful check is the doubling test. Take the starting values on this page, double the main quantity in your head, and ask what the formula would give: for a quantity the formula multiplies by, the answer doubles too. That is why the first thing to get right is the quantity itself — the amount used, the hours run, the area, or the distance — and the second thing is the rate or price. Everything else on the page is either a conversion between units, which the formula handles for you, or a fixed amount, which you can read straight from a bill.
Common mistakes
Most wrong answers from this calculator come from the same few slips. They are easy to make and easy to check for, and checking for them takes less time than re-doing the whole calculation:
- Mixing up watts and kilowatt-hours. Watts describe how fast an appliance uses energy; kilowatt-hours describe how much energy it has used. Entering a wattage where the calculator asks for energy, or the reverse, makes the answer wrong by a factor of a thousand or by the number of hours, and the mistake is easy to miss because the result still looks like a plausible number.
- Mixing up the period. A monthly figure entered where the calculator asks for a year, or a daily figure where it asks for a month, throws the answer out by a factor of twelve or thirty. Check the unit next to every field before you type, and check the period the result is stated for before you compare it with a bill.
- Rounding too early. Rounding each step of a calculation before the next step uses the rounded number, and the rounding adds up. Enter the full numbers the calculator asks for, let it do the arithmetic, and round only the final answer when you quote it.
- Ignoring what the calculator leaves out. The assumptions section above lists what is not included in the answer — fixed charges, taxes, maintenance, installation and other costs, depending on the calculator. Treating the result as a complete bill, or as a complete saving, is the most common way to be disappointed by it afterwards.
- Trusting a nameplate figure for a cycling appliance. A fridge, an oven or an air conditioner does not draw its rated power all the time it is switched on: it cycles. Using the nameplate watts as if they applied continuously overstates the energy, and the assumptions section on this page says so for the appliances it applies to.
Ways to lower the cost
The result on this page is a starting point, not a verdict. These are the practical ways to use it:
- Measure before you spend. Run the calculator with your real numbers first, and find which input drives the result, because the section above ranks them. Money spent on a small input buys a small reduction; the same money spent on the biggest input buys a bigger one.
- Check the rate before you change anything else. The rate scales the whole answer, and it is the one input you can sometimes change without changing how you live: a different tariff, a different time of use, or a corrected reading can move the result without any new equipment.
- Cut the quantity, not the comfort, where you can. Hours of use and duty cycle are quantities you control directly, and a small reduction in the hours something runs, or in how hard it works, reduces the cost in proportion. The calculator lets you test the reduction before you commit to it.
- Fix the fixed part separately. If the result table shows a large fixed or standing charge, reducing use will not reduce that part. That is a different problem from reducing use, and it is solved by looking at the tariff itself rather than at how much you use.
Frequently asked questions
Why does the calculator ask for power?
Because the formula needs it, and because it is the number most people get wrong. The help text next to the field says where the number comes from, and using the number from that source — a bill, a meter reading, a label, or a measured figure — is what makes the answer about your home rather than about an average one.
Can I use the preset rate, or should I use my own?
Use your own rate whenever you have it. The presets on this page are published averages or regulated figures, provided as starting points so the calculator works before you have a bill to hand. Your own rate, taken from a recent bill, is always the more accurate input, and the result moves in proportion to it.
Does the result include tax?
The calculator applies the rate you enter exactly as you enter it. If the rate you type already includes tax, the result includes it; if it does not, the result does not, and tax must be added afterwards. Where a calculator on this site has its own tax field, that field is the place to enter it, and the assumptions section above says which case applies to this page.
Why is my bill higher than this calculator's answer?
A bill can be higher than this calculator's answer for reasons the calculator does not include: fixed charges and taxes, other appliances and loads, an estimated reading, or a period that does not match the one you entered. Compare the result table row by row with the bill, and the row where the two diverge is the one to investigate.
What should I check first if the answer looks wrong?
Check the inputs in the order the formula uses them: the quantity first, then the rate or price, then any efficiency, then the period. The most common cause of a surprising answer is a unit mistake — watts where kilowatt-hours were asked for, a monthly figure where an annual one was asked for, or a percentage entered as a decimal. The field help text and the formula above the result table are the two places that settle it.
How often should I re-run this calculation?
Re-run it whenever one of its inputs changes: a new tariff, a new appliance, a different pattern of use, or a new bill that gives you a better rate. The calculation itself takes a minute, and a fresh run with current numbers is more useful than an old answer remembered from last year. Once a year, with a recent bill in hand, is a good routine for most households.
Related calculators
- Appliance Energy Cost Calculator — the same maths, priced.
- Electricity Cost Calculator — price a known kWh amount.
- What uses the most electricity in a home?