Solar Payback Calculator
Payback answers one question: how many years of bill savings does it take to recover what the system cost after incentives? Enter your quote, any grants or tax credits, and your expected first-year saving (estimate it with the Solar Savings Calculator).
The results below are from your previous entries — fix the errors to update them.
Simple payback (net cost ÷ first-year saving)
—
| Net cost after incentives | — |
|---|---|
| Break-even year (with your price-rise assumption) | — |
| Total saving over 25 years | — |
| Position after 25 years (saving − net cost) | — |
Cumulative savings by year
| Year | Saving that year | Cumulative |
|---|
How the calculation works
simple payback = net cost ÷ first-year saving
The table then compounds your assumed annual price rise year by year, so the break-even year accounts for savings growing over time.
Worked example
A 10,000 system with 2,000 of incentives and 1,000 saved in year 1 has a net cost of 8,000 and a simple payback of 8.0 years; over 25 flat years it saves 25,000, ending 17,000 ahead. With savings rising 10% a year, cumulative savings pass the net cost during year 7.
Assumptions and limitations
- Estimates, not guarantees: generation, prices and your usage all vary. Degradation, inverter replacement (often around year 10–15), maintenance and financing costs are excluded — include them in the installed cost or incentives if you want them counted.
- No discounting (time value of money) is applied; a financial adviser would discount future savings.
- Incentives change by country and year — use only incentives you have confirmed you qualify for.
Walking through the calculation, step by step
The calculator on this page does one thing, and it does it in the open: it turns the numbers you type into the answer shown in the result table, using the formula above it. There is no hidden adjustment and no extra factor added after the formula. If you can follow the formula line by line, you can check the calculator by hand, and that is exactly what this section does. Start with the first field, installed cost (before incentives), and read its help text before you type anything: the help tells you where the number comes from, and a number taken from the right place is the single biggest improvement you can make to the answer.
Here is the formula again, broken into its steps, in the order the calculator applies them:
- net cost = installed cost − incentives Work through this line before moving on: every number in it comes from a field above, so a wrong entry here follows you into the answer.
- simple payback = net cost ÷ first-year saving Work through this line before moving on: every number in it comes from a field above, so a wrong entry here follows you into the answer.
Watch the units as you go, because most mistakes in this kind of calculation are unit mistakes, not arithmetic mistakes. The fields on this page use these units: %, currency. Power and energy are the pair that causes the most confusion: power, in watts or kilowatts, is a rate at which energy is used, and energy, in kilowatt-hours, is power multiplied by time. A 2,000 W heater running for one hour uses 2 kWh, and a 2 kW heater running for half an hour uses 1 kWh. Watts become kilowatts when you divide by 1,000, and kilowatt-hours are what your bill counts, so keeping those two apart is what makes the answer come out in the right size.
The worked example above is the best way to test whether you have understood the steps. It begins like this: A 10,000 system with 2,000 of incentives and 1,000 saved in year 1 has a net cost of 8,000 and a simple payback of 8.0 years ; over 25 flat years it saves 25,000, ending 17,000 ahead. Read it slowly and match each number in it to a field above and to a line of the formula. Notice the order: the quantities are combined first, the rate is applied last, and the answer is then expressed for the period the example states. If you change one number in the example and keep the rest, the answer changes in the direction the formula predicts, and that is a useful habit: change one thing at a time, run the calculator again, and watch which output moves.
How to read your result
The result table on this page is a comparison, and its most useful figure is the difference between the two sides, not either side on its own. Each side is calculated with the same method and the same period, so the difference is a fair one: it is what changes if you switch from one option to the other and nothing else changes. Read the two sides first, then the difference, and then ask whether the difference is large enough to matter to you, because a small difference can easily be overturned by a price change or by a detail the calculator leaves out.
Read the result table row by row, in this order:
- Net cost after incentives is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- Break-even year (with your price-rise assumption) is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- Total saving over 25 years is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
- Position after 25 years (saving − net cost) is the row to read when you want that part of the answer on its own. Compare it with the headline row: if it is most of the total, it is the part to work on first, and if it is small, changing it will not move the answer much.
The worked example on this page puts the result in context. It ends with this conclusion: With savings rising 10% a year, cumulative savings pass the net cost during year 7 . Hold your own result next to that conclusion and ask whether the two are in the same range for similar inputs. If yours is far away, the most likely cause is an input that does not match the example, and the field help text above will tell you which one to check first.
What affects the result most
Not every input matters equally, and the ranking is written into the formula. An input that the formula multiplies by moves the answer in proportion: double it, and the answer doubles, as long as everything else stays the same. An input that the formula divides by moves the answer the other way: raise it, and the answer falls. A fixed charge is different again: it does not move at all when you use more, so it matters most when use is low and least when use is high. Before you spend effort improving an input, check where it sits in this ranking, because a precise number for a small input is worth less than a rough number for the biggest one.
- Installed cost (before incentives): raising this raises the result in proportion, because the formula multiplies by it. It is usually the input where a better measurement pays off first.
- Incentives, grants or tax credits: raising this raises the result in proportion, because the formula multiplies by it. It is usually the input where a better measurement pays off first.
- Expected saving in year 1: raising this lowers the result, because the formula divides by it. It is the one input where a bigger number is good news.
- Electricity price rise per year: this scales the whole answer. A rate that is wrong by a tenth makes the answer wrong by a tenth, whatever else you enter, so it deserves the most careful reading of any field on the page.
A useful check is the doubling test. Take the worked example on this page, double its main quantity in your head, and ask what the formula would give: for a quantity the formula multiplies by, the answer doubles too. That is why the first thing to get right is the quantity itself — the amount used, the hours run, the area, or the distance — and the second thing is the rate or price. Everything else on the page is either a conversion between units, which the formula handles for you, or a fixed amount, which you can read straight from a bill.
Common mistakes
Most wrong answers from this calculator come from the same few slips. They are easy to make and easy to check for, and checking for them takes less time than re-doing the whole calculation:
- Using the wrong rate. A preset average is a starting point, not your tariff. If your bill shows a different rate, use that one: the calculator multiplies by the rate you enter, so a rate that is a few cents out moves the whole answer by the same proportion.
- Mixing up the period. A monthly figure entered where the calculator asks for a year, or a daily figure where it asks for a month, throws the answer out by a factor of twelve or thirty. Check the unit next to every field before you type, and check the period the result is stated for before you compare it with a bill.
- Rounding too early. Rounding each step of a calculation before the next step uses the rounded number, and the rounding adds up. Enter the full numbers the calculator asks for, let it do the arithmetic, and round only the final answer when you quote it.
- Ignoring what the calculator leaves out. The assumptions section above lists what is not included in the answer — fixed charges, taxes, maintenance, installation and other costs, depending on the calculator. Treating the result as a complete bill, or as a complete saving, is the most common way to be disappointed by it afterwards.
- Trusting a nameplate figure for a cycling appliance. A fridge, an oven or an air conditioner does not draw its rated power all the time it is switched on: it cycles. Using the nameplate watts as if they applied continuously overstates the energy, and the assumptions section on this page says so for the appliances it applies to.
Making the comparison work for you
The result on this page is a starting point, not a verdict. These are the practical ways to use it:
- Use your own prices on both sides. A comparison built on preset prices is a comparison of averages. Put your own electricity price and your own fuel price in, and the difference becomes a number about your home and your car.
- Keep the period the same on both sides. The comparison only works if both options are costed over the same distance, the same year or the same charge. Change the period for one side and you must change it for the other, or the difference is meaningless.
- Remember what the comparison leaves out. The assumptions section above lists the costs this calculator does not include, and for a purchase decision those costs can matter more than the running-cost difference. Read them before you decide, not after.
- Re-run it when a price changes. Fuel and electricity prices move, and a comparison that was clear last year can be close this year. The calculation takes a minute, and re-running it with the new prices is the cheapest way to check whether the answer still holds.
Frequently asked questions
Why does the calculator ask for installed cost (before incentives)?
Because the formula needs it, and because it is the number most people get wrong. The help text next to the field says where the number comes from, and using the number from that source — a bill, a meter reading, a label, or a measured figure — is what makes the answer about your home rather than about an average one.
Can I use the preset rate, or should I use my own?
Use your own rate whenever you have it. The presets on this page are published averages or regulated figures, provided as starting points so the calculator works before you have a bill to hand. Your own rate, taken from a recent bill, is always the more accurate input, and the result moves in proportion to it.
Does the result include tax?
The calculator applies the rate you enter exactly as you enter it. If the rate you type already includes tax, the result includes it; if it does not, the result does not, and tax must be added afterwards. Where a calculator on this site has its own tax field, that field is the place to enter it, and the assumptions section above says which case applies to this page.
Which side wins if prices change?
The side that wins depends on the prices you enter, and prices change. Re-run the comparison with the new electricity price and the new fuel price, keeping the distance and the period the same, and the difference will tell you whether the answer still holds. A comparison is arithmetic, not a recommendation, and it is only as current as its prices.
What should I check first if the answer looks wrong?
Check the inputs in the order the formula uses them: the quantity first, then the rate or price, then any efficiency, then the period. The most common cause of a surprising answer is a unit mistake — watts where kilowatt-hours were asked for, a monthly figure where an annual one was asked for, or a percentage entered as a decimal. The field help text and the formula above the result table are the two places that settle it.